6DCT450 Service kit Transmission parts, repair guidelines, problems, manuals
Transmission general data
|Number of gears||Transmission Type||Drive||Torque (Nm)||ATF (full capacity) L||ATF (change) L||ATF type|
What are you looking for?
Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor
Technical issues and repair guidelines
For the DCT450 transmission reassembly, specialists order the repair kit of gaskets and seals. Repair kits contain gaskets (required as a minimum), which affect the operation of this delicately adjusted transmission. The wearout of Teflon rings also has a major impact on the transmission operation. Replacement of the filter with ATF is a typical repair procedure recommended for maintenance of WD Powershift transmissions. It is advisable to change oil more often and not later than after 45-50 thousand kilometers.
For the overhaul of 6DCT450 it is common to replace solenoids in order to solve problems with the valve body. The overhaul of the clutch basket in 6DCT450 is accompanied by order of springs and retainers-clips. When the dry clutch gets out of order specialists have to replace the step motor or more frequently the transmission itself