6L45 Friction Transmission parts, repair guidelines, problems, manuals
Transmission general data
| Number of gears | Transmission Type | Drive | Torque (Nm) | ATF (full capacity) L | ATF (change) L | ATF type |
|---|---|---|---|---|---|---|
| 6 | AT | RWD | 450 | 9,8 | 6,2 | Mercon SP |
What are you looking for?
Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor
These gearboxes usually get in repair services for scheduled ATF change, replacement of the filters with the pan gasket. ATF gets contaminated because of aggressive accelerations and wear-out of the lock-up clutch. It is recommended to change ATF in accordance with its contamination level, but no later than after travelling 80 thousand kilometers.
Typical problems
The problem detected on the 6L80 (manufactured before 2008) is related to the design of the pump cover and cranking of filler rings resulting in problems with shifting from the 2-nd to the 3-rd gear and delays in switch-on of Forward or Reverse gears.
In case of the overhaul, it is recommended to check the leak integrity of the drum 555. There may be some hidden cracks leading to the operation pressure losses in packs causing problems when shifting gears 2-3 and Reverse. Overheating is dangerous for all pistons, which have to be fully replaced. It is the problem inherited from its 5-speed predecessor 5L40E.
All pistons and retainers are replaced quite frequently (kit of pistons 6L45-50). Problems with the torque converter (TC) may also occur in these gearboxes. The wheel-hub early gets out of order. Rare and complicated cases of the overhaul show some vulnerability of the pack (4-5-6 Clutch), which in neglected cases leads to burning of all frictions, including steel discs and pistons. The reason is often related to wear-out of the TC bushing and TC itself.
The torque converter is often considered to be a soft spot in American gearboxes. After 100-150 thousand kilometers (depending on engine and driving style), it is recommended to test the TC seal for leaks. When there are leakages in the seal or ATF gets rapidly contaminated, then it is desirable to get TC in repair services to prevent problems with the pump or the valve body. This measure particularly should be applied when automatic gearboxes operate jointly with motors (with maximum torques).
Instruction manuals and useful links Suggest your link
| Link type | Source | Description |
|---|---|---|
| www.at-manuals.com | Scheme 6L45 | |
| drive.google.com | Repair manual 6L80E ATSG | |
| Sonnax | Valve Body Layout GM 6L45, 6L50, 6L80, 6L90 | |
| Sonnax | Vacuum test 6L45, 6L50, 6L80, 6L90 | |
| www | Sonnax | 6L80 Family Identification Guide |
| www | Sonnax | Location and Function of New #8 Checkball for 6L80/90 |
| www | Sonnax | 6L80/6L90 "No Movement" After Repair |
| Video | Sonnax | 6L80 Series Transmission Upgrades & Repairs |