BMXA Transmission parts, repair guidelines, problems, manuals
Transmission general data
Number of gears | Transmission Type | Drive | ATF (full capacity) L | ATF (change) L | ATF type |
---|---|---|---|---|---|
4 | AT | FWD | 6 | 2,7 | Honda Z-1 |
What are you looking for?
Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor
Which cars run with this gearbox?
Brand | Model | Year | Type | Engine |
---|---|---|---|---|
Acura | EL | 97-05 | 4 SP FWD | L4 1.6L 1.7L |
Honda | CIVIC (EXC. HX) | 01-05 | 4 SP FWD | L4 1.7L |
Honda | JAZZ | 08-12 | 4 SP FWD | L4 1.5L |
Honda | STREAM | 02-06 | 4 SP F/4WD | L4 1.7L |
-
-
- Filters, Filter Cartridges, Filter Cartridge, Oil Pan Filter, Inlet, Filter Kit
- Friction Discs, Frictions, fric, Friction Disc, Friction, Friction Plate, Friction Ring, fric., Clutch Plate, Friction Lining
- Friction kits, friction pack, friction set, High Energy Clutch Friction Module, Friction clutch
- ohk, OHK kit, Overhauls, mok, Overhaul kit, Masterkit, Master kit, Master Overhaul, Repair package, Overhaul, Rebuild kit, Master Rebuild, Super Rebuild Bundle, Banner Kit, SUPER KIT, SUPERIOR KIT
- Seals, Metal clad seal, Lip Seals, Connector Hole Seal, Lip Seal, Main Seal, Radial Lip Seal, Main Seal, Manual Seal, Oil Feed Seal, Side Cover Seal, Seal Cooler, Seal Oil Cooler, Case Seal
- Reprogramming Kit, Kit Reprogram, Reprogram Competition, Kit Shift, Kit Auto Shift, Kit Stick Shift, Shift Correction Kit
- solenoid, Shift Solenoid, Kickdown Solenoid, Control Solenoid Support, Solenoid Retainer, Interlock Solenoid, Solenoid Switch
- EPC, Pressure Solenoid, Pressure Control Solenoid, Pressure Solenoid, PWM solenoid, Pressure Regulator Solenoid
- Steel Kits, Steel Set Kit, Steel Clutch Plate Kit, Steel kit, clutch steel, clutch steels, Steel set, steel pack, module kit, Steel Plate Clutch Kit, Steel Plate Kit, Steel Plate Module, Steel Plate Set, Steel Module
- Steel Plates, steel, Steels, steel disk
- VB plate, Valve body plates, Valve body plate, ValveBody, V/Body, valve-body, v body, v-body, v/b, Orifice, Hydraulic control unit, HCU
Technical issues and repair guidelines
The most well-known range of 4-speed 3-shaft transmissions M4TA - Honda (CR-V) with engines from 2 to 2.4 liters. Automatic transmissions Honda are notable for their simplicity and reliability. Because of this, many car owners neglect basic maintenance services such as ATF quality control and timely replacement of the filter. Subsequently it results in clogging of valves in the valve body and solenoids, oil starvation and rapid wear-out of sealing rings, frictions and bushings. 300-400 thousand kilometers is considered to be a standard mileage before the first overhaul for these Honda transmissions.
Repair procedures
The torque converter (TC) is the first component to be repaired in Honda automatic transmissions. A major repair with reassembly starts with change of transmission fluid and replacement of a metal filter. The main external filter is usually installed by specialists on old transmissions.The repair of this family of transmissions with the filter is performed with the help of ordered repair kit of gaskets and seals with friction elements and steel discs. Friction elements are frequently replaced separately and steel discs as a full kit. Masterkit is the fullest repair kit of friction elements and steel discs with kit of gaskets.
Honda friction components usually operate for a long time, but after exhausting an enormous resource of frictions (above 300 thousand kilometers) or when these elements are soaked with burnt oil, then the change of all frictions would be the best option.Worn-out switching solenoids of linear pressure and the clutch lock-up solenoid are commonly replaced during repair procedures. The design of solenoids includes anodized plate element, which is likely to wear. This component is changed after running over 200 thousand kilometers.
Instruction manuals and useful links Suggest your link
Link type | Source | Description |
---|---|---|
www.at-manuals.com | TransTec Manual | |
www.at-manuals.com | Scheme | |
drive.google.com | Transtec BMXA manual |