What are you looking for?

Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor

This transmission is a “rare guest” in the repair services, repair specialists mainly change oil and filter. It is recommended to change ATF after reaching the mileage of 100 thousand kilometers, and then every 50-60 thousand miles. It is required to monitor ATF transparency regularly, because with aggressive driving style ATF may get contaminated much earlier. In rare cases, transmission specialists face the problem when the torque converter lock-up damages the pump. The issue is expressed in vibrations and leakages through the pump seal. In this case specialists not only replace the seal, but also repair the torque converter and replace clutches. Another problem, similar to the issue in U660E, is wear of the case center bearing. This problem occurs when drivers get carried away with the kick-down on cold oil. One more typical problem of this transmission is damage of the double drum High/Low. After running 100 thousand kilometers it is also recommended to monitor the ATF temperature and the heat exchanger operation, similar to VW problems with the TF60-SN transmission. In old cars repair specialists advice to clean the heat-exchanger during full ATF change, to ensure reaching of 300 thousand kilometers mileage before the overhaul.