KM175 Clutch Transmission parts, repair guidelines, problems, manuals
Transmission general data
Number of gears | Transmission Type | Drive | ATF (full capacity) L | ATF (change) L | ATF type |
---|---|---|---|---|---|
4 | AT | FWD | 5,8 | 3 | SP-III |
What are you looking for?
Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor
Technical issues and repair guidelines
It’s a popular series of transmissions from Mitsubishi – Hyundai and one of the most popular Mitsubishi transmissions in repair services. Owners of cars with this type of transmissions prefer a cosmetic repair by their own forces or replacement with the used transmission.
The repair kit of gaskets and seals is ordered together with the kit of friction components. Rarely, owners decide to perform a classic reassembly and additionally order the kit of steel discs. For cars with short mileages and normal pressure state in packages, it will be enough to replace the filter (for series КМ175-177) and change ATF.
Seals are usually replaced because of fluid leakages between the transmission and the torque converter unit, which is considered to be a sign of the torque converter wear-out. Bushings and all rings are replaced in order to restore the pressure in packages. Firstly, frictions burn in Forward/Direct packages (with steel discs), then its turn for friction clutches of the package Overdrive with steel discs and the Low/Reverse package. In most cases, replacement of spare parts and friction elements is accompanied with replacement of the brake band (Kick-down). The electrical mechanism of this transmission is very reliable, and only solenoids,which reached the end of their service life, should be replaced. Before solenoids replacement, it is recommended to check the wiring integrity.