A4CF1 Valve body Transmission parts, repair guidelines, problems, manuals

Transmission general data

Number of gears Transmission Type Drive Torque (Nm) ATF (full capacity) L ATF (change) L ATF type
4 AT FWD 160 6 3 SP-III
Related transmission models or modifications of this transmission:
Part type (1) Expand

Technical issues and repair guidelines

Typical problems during the first years of the transmission operation are related to change of ATF and filter replacement. It is recommended to replace all friction components together with the kit of gaskets and seals during the transmission rebuilding.


Common problems in A4CF2-\1:

The list of the most popular repair procedures for this transmission includes the valve body reassembly and replacement of solenoids. The most vulnerable failure-prone are VFS (EPC) solenoids and PWM solenoids. The problem is related to contaminated and hot (because of the torque converter) transmission fluid and resource wear-out. In many cases problems with electrical parts are caused by faulty wiring of solenoids.


Some problems may occur in the pump as a result of a long-time operation with the leaking seal, damaged bushing (applicable to A5HF1) and shaft vibrations.Specialists assume, that high temperatures and forced torque converter lock-up lead to rapid oil contamination and this suspended fluid clogs and wears out channels in the valve body and solenoids, leading to the oil pressure shortage in packages and early burning of friction components. A long-time operation with the pressure shortage and vibrating clutch lock-up leads to problems with the pump and some other unpredictable issues.