A4LD Piston Kit Transmission parts, repair guidelines, problems, manuals
Transmission general data
| Number of gears | Transmission Type | Drive | ATF (full capacity) L | ATF (change) L | ATF type |
|---|---|---|---|---|---|
| 4 | AT | RWD | 9,5 | 4 | Dexron VI |
What are you looking for?
Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor
Technical issues and repair guidelines
The torque converter in these transmissions is the first component to be replaced during repair procedures. In most cases, transmission specialists order the Masterkit repair kit to fix this transmission. This kit includes all gaskets and seals, rings and friction components with discs, except filter and brake bands, which are ordered separately. Repair kits contain all necessary gaskets and spare parts of the valve body, other gearbox components and pan, to replace the old rubber, paper gaskets and plastic of the transmission, which served for more than 10 years.
This transmission is handed in for repair after failures of the brake band О.D.\Intermediate and the drum Overdrive. The drum Overdrive is also considered to be a soft spot and gets out of order together with the brake band and Servo piston of the brake band. When solving the abovementioned problems, specialists also replace the brake band piston INTM./ O.D.
Vibrations and overheating of this drum may lead to replacement of not only friction elements of the package Overdrive, steel discs, and bearing disc, but also of the pump support.In many cases, packages get burnt because of worn-out pump bushing and insufficient pump productivity. This problem can be detected by means of the leaking seal.
The repair of electrical components consists of replacement of EPC solenoids, solenoids shift (4), solenoids of the torque converter locking (TCC), which reached the end of their service life.The valve body often causes insufficient (on bushings) or excessive pressure. The valve body gets clogged with friction dust from the worn torque converter. If the torque converter friction is worn out to the glue layer, then it significantly speeds up the wear-out and clogging of solenoids and the valve body.The most replaceable clutch discs are friction elements of the Forward Clutch package and corresponding steel discs, which twofold outrun the package Direct in sales, other friction elements are replaced more rarely.
Instruction manuals and useful links Suggest your link
| Link type | Source | Description |
|---|---|---|
| www.at-manuals.com | Remove and Install A4LDE | |
| www | www.at-manuals.com | Scheme C-3 |
| www | www.at-manuals.com | Clutch application |
| drive.google.com | Repair manual 4R55E | |
| drive.google.com | A4LD Update Handbook ATSG | |
| Sonnax | Valve Body Layout 4R/5R44E, 4R/5R55E | |
| Sonnax | Vacuum test 4R44E-5R55E | |
| drive.google.com | Ford C3 Repair manual |