A618 Piston Kit Transmission parts, repair guidelines, problems, manuals

Transmission general data

Number of gears Transmission Type Drive Torque (Nm) ATF (full capacity) L ATF (change) L ATF type
4 AT RWD 610 13,4 4,8 Mopar ATF+4
Part type (1) Expand

The design of the A518/A618 and 46RH / 46RE / 47RH / 47RE / 48RE transmissions is based on the same principle. All differences and modifications consist in the increased number of gears and addition of the torque converter and the block of solenoids.

Typical problems

Transmissions of this family were used by car manufacturers for three decades thanks to their easy maintenance and resistance to wear. Not complicated assembly of these transmissions simplifies their repair process. Early transmissions of this family rarely require any repair. The problem of spare parts replacement occurs in cars equipped with transmissions, which have solenoids and the valve body. These transmission components get out of order when the car mileage reaches 100 thousand kilometers. Such breakdowns result in expansive repair services, because damaged components should be replaced.

The most problematic areas in A518/A618:

- Central Support

- Retained (Governor) is usually rebuilt

- Direct Drum – exhausts its resource, but more often this component burns out because of a long-time operation with insufficient linear pressure

- Reverse Drum

- Frictional wheel-hub. Direct.

- The set of solenoids and sensors

Other seals, bushings, springs and bearings fail to function occasionally, due to peculiarities of the driving style and operation.