CFT23 Valve body Transmission parts, repair guidelines, problems, manuals
Transmission general data
Number of gears | Transmission Type | Drive | Torque (Nm) | ATF (full capacity) L | ATF type |
---|---|---|---|---|---|
∞ | CVT | FWD | 170 | 8,9 | WSS-M2C928-A |
What are you looking for?
Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor
Technical issues and repair guidelines
But in more powerful CFT30 the belt did not cope with loads (similar to problems of Nissan Murano), therefore the pulling belt was applied here as in the variator 01J.
Original spare parts for repair of these CVT (produced by ZF) are basically neither produced nor sold. It is almost impossible to get even used spare parts for repair of CFT. Therefore the most popular spare parts for repair of CVT CFT23 are filter and repair kit of gaskets and seals. Experienced specialists in repair services recommend to change the whole kit of rubber gaskets and seals as well as filter and oil without waiting for problems with surfaces of cones after 3-4 years of intensive operation. The belt is produced by only one company and similar to other CVTs with pushing belt. Friction clutches F and steel discs used in this transmission are the same as for ZF 5HP24/30/19.
Instruction manuals and useful links Suggest your link
Link type | Source | Description |
---|---|---|
Sonnax | Valve Body Layout CFT30 | |
Sonnax | Vacuum test CFT30 |