RE4F03A Steel Kit Transmission parts, repair guidelines, problems, manuals
Transmission general data
| Number of gears | Transmission Type | Drive | Torque (Nm) | ATF (full capacity) L | ATF (change) L | ATF type |
|---|---|---|---|---|---|---|
| 4 | AT | RWD/AWD | 240 | 8,2 | 3,5 | AT-Matic D Fluid |
What are you looking for?
Overhaul Kit | Friction Kit | Friction | Steel Plate | Steel Kit | Band | Solenoid Kit | Solenoid EPC | Solenoid TCC | Pump | Shaft | Drum | Valve body | Torque converter | Hub | Piston | Piston Kit | Planetary Gear | Filter | Gasket | Bushing | Seal | Bearing | Pressure Plate | Stator | Differential | Retainer | Inhibitor Switch | Instruction manual | TOOLS & ACCESORIES | Sensor
Technical issues and repair guidelines
During each overhaul of this transmission, repair specialists replace the kit of gaskets and seals, which should be changed after a long-time operation to prevent the damage of the rubber elements. But the main repair procedure consists of replacement of rings, because their wearout may have a negative impact on the oil pressure in clutch packages. In most cases, repair procedures lie in cleaning and reassembly of the valve body, replacement of gaskets, spare parts, springs (of shock absorber), and the torque converter repair. Every second repair includes replacement of the solenoids block The issue with worn-out solenoids may lead to fluid shortages in clutch packages and result in slipping of friction clutches, oil burning and later burning of all frictions.
Hard parts of this transmission are very reliable. This gearbox may be considered invincible except for oil leakages from the pump seal (occur after 150 thousand kilometers), which usually says about the wear-out of torque converter spare parts and the pump bushing. It is recommended to change the fluid not according to its period of operation, but according to its transparency.
When this transmission unit in old cars is exposed to "oil starvation", then it may lead the following malfunctions ( in the following order):
- Reverse drum with the piston, wear-out of the surface by the brake band.
- High clutch drum. The shaft cranks, different types of wear-out of the shaft surface and drum. Reverse friction elements are prone to burning
If the fluid state in monitored and solenoids are timely replaced, then this transmission unit will operate properly for a long period of time.
Instruction manuals and useful links Suggest your link
| Link type | Source | Description |
|---|---|---|
| www.at-manuals.com | Repair manual RE4F03A | |
| www.at-manuals.com | Service manual RE4F03A | |
| www | www.at-manuals.com | Line pressure specifications RE4F03A |
| drive.google.com | OVERHAUL RE4F03B |