There are so many problems with electrification development. No infrastructure, no stations to charge the batteries. And charging takes too long. Also, many cars don’t match the charger, many vehicles have to
Recently, Honda has reported that the Odyssey model will celebrate its 25-year anniversary this year. To mark this event, the automaker unveiled that all new Odysseys will be equipped with a ten-speed automatic transmission and an Idle-Stop system. Earlier, these options were implemented only in the upper-tier models (Touring and Elite trims).
In recent months, issues with the Powershift DCT transmission in Ford’s Fiesta and Focus models have become a front-page news of automotive magazines and this scandal has gained a snowball effect on the American Auto Giant. To address the problem, Ford has announced the clutch warranty extension on the affected models by 2 years or 40 thousand miles, to a total of 7 years or 100 thousand miles.
Despite numerous internet appeals to Toyota to include a manual transmission option for the new Toyota Supra, it seems that the Japanese automaker plans to stick only with the 8-speed automatic solution from ZF. So far, it is unclear whether Toyota will decide to add a gear stick in the future, but fans of manual Supras are excited to know that the American company European Auto Group (EAG) is ready to take up this challenging task.
Constantly accelerating pace and growing road traffic in cities often forces you to make hasty decisions when you are behind the wheel to reach the destination point in time, but in some cases it happens at the expense of the car’s operability. For instance, it has been widely debated on how it will affect the car equipped with the automatic transmission, if you shift your car from R to D gear while still moving backwards.
Porsche owners frequently try to use the operational capacities of their cars on the road to the fullest extent, thereby exposing powertrain components to high loads. To keep Porsche cars in perfect operational conditions, they must be serviced by true professionals. That’s where specially trained Porsche technicians come into play.
Michelle Hughes, one of thousands of unlucky owners of Ford Fiesta equipped with a defective Powershift transmission, was visited by two Ford technicians who wanted to check her car and provide free-of-charge repair services if needed. At first sight, it seemed absolutely normal, but later it emerged that one of the technicians was Ford’s top manager who for some reason didn’t use his real name and position in the company during the meeting with Ms. Hughes.
Recently, Ricardo has announced the launch of production of newly-designed transmission solutions for the ABB FIA Formula E Championship 2020. This statement manifests the start of the Ricardo’s 4-th season of providing its advanced car components to teams taking part in the most popular 100% electric street racing competitions.
MAHLE Powertrain’s site in Michigan has recently obtained accreditation from the California Air Resources Board (CARB) as a facility compliant with all necessary requirements for conducting emissions certification tests.
Ford Otosan, an auto manufacturing company jointly established by Ford and the Turkish company Koç Holding, plans to expand the production of transmission units in Turkey. Not long ago, the company has finished preparation of testing facilities for heavy-duty transmissions.
Recently, it has transpired that AW Texas, a U.S. subsidiary of Aisin AW Co., will build a new production site in Cibolo, Texas that will give numerous workplaces to the region.
Allison Transmission not only invests much financial resources in new technologies and development of top-quality automatic transmissions for a wide range of applications, but also pays close attention to providing a sufficient post-sales support to ensure accurate operation of Allison’s automatics and to keep customers fully satisfied. That’s what Allison’s Mobile Training unit is actually doing in Brazil.
In
the first half of 2019, ZF’s sales performance reached around €18.4 bln, while
the operating earnings run at approximately €650 mln. On the basis of current
financial situation in the company and unfavorable economic situation in the
automobile industry, ZF had to lower its sales and earnings predictions for
2019.
Not
long ago, Ford officially stopped production at its transmission production
facility known as Ford Aquitaine Industries (FAI) in France. Founded in 1972,
the FAI has now ceased to exist within the framework of the Ford’s
restructuring strategy.
As hybrid tech solutions gain popularity in the automobile industry, Toyota plans to strengthen the production of spare parts for hybrid cars in Europe. For this purpose, the Japanese automaker plans to start production of the 2-nd hybrid transmission solution (e-CVT) at the TMMP plant in Walbrzych. It is expected that the process of manufacturing will be launched in two years.
Earlier this week, Ford has released new technical info on powertrain characteristics of its anticipated GT500, namely 5.2-liter supercharged V8 and new seven-speed dual-clutch transmission. In this article, we will focus on the transmission solution implemented in the new Mustang model.
Probably every transmission repair specialist was keen on LEGO constructions or at least enjoyed making some minor things with their hands. Here's the game taken to a new level of creativity!
Modern auto industry is full of sophisticated drivetrain technologies which are supposed to make your driving experience even more pleasant and trouble-free. Despite a great abundance of sophisticated technical solutions, it is highly likely that very few people know a transmission solution operating like a manual CVT.
Over recent years engineers developed a lot of gear shifting solutions for different car brands, which may seem a bit unusual for oldtime drivers. In this article we will review the most peculiar gear stick technologies and provide video materials related to these technologies.
Only few people know about transmission concepts which were popular 70-90 years ago. For men of today, these gearboxes may seem very unusual and weird, but even now some gearboxes that date back to those years are quite competitive in comparison with modern transmissions.
Nowadays Extroid CVTs are commonly known as “toroidal” due to the fact that the working surface of driving and driven discs in this transmission has the form of a torus. Extroid CVT is not a V-belt transmission, but a friction drive CVT.